Clay Paky IGLOO Manual De Instrucciones página 12

6
DIP SWITCH 1: DMX ADDRESS SETTINGS
The DMX address set on the Dip-switch 1, is the address to control the
switching-on / switching-off of the device via the control unit.
ON
1 2 3 4 5 6
Set dip-switches according to the required DMX address:
Example: DMX 11 address settings
Turn dip-switches 1, 2, 4 ON
ON
1 2 3 4 5 6
BIT STATUS
101-255 FIXTURE SWITCHED-ON
26-100 FIXTURE SWITCHED-OFF
0-25 NO FUNCTION
IGLOO
7 8 9 10
7 8 9 10
DIP-SWITCH 2: RECEIVING CONTROL MODE SETTINGS
Switch 1, 2, 3 ON:
Wireless operating mode (Radio)
ON
1 2 3 4
LED LANGUAGE
• GREEN LED ON: DMX board power on
• RED LED
On
Off
Slow flashing
Fast flashing
Mixed flashing
• YELLOW LED
Off
Mixed flashing
On
Fast flashing
12
Switch 1, 2, 3 OFF:
Wired operating mode (DMX cable)
ON
1 2
Bootloader
No DMX signal
Relay OFF
DMX signal found
Relay OFF
No DMX signal
Relay ON
DMX signal found
Relay ON
Not assigned to a transmitter
Assigned to a transmitter
and no DMX signal
Assigned to a transmitter and
DMX signal found
link to transmitter lost or
connecting to transmitter
3 4