Bluetooth Link - JMA MULTICODE SINGLE Manual De Instrucciones

10.1 BLUETOOTH LINK

The MULTICODE SINGLE machine comes with a Tablet, with the application so the MULTICODE SINGLE can function,
but the JMAKeyPro application can be installed in any Tablet with a screen of 8" or more and with Android 4.4.2 "Ki-
tkat" or later. In the case of changing the Tablet, and using another Tablet to control the machine, first you will have
the couple the Tablet and the MULTICODE SINGLE machine. To do that, proceed as follows. Switch on the machine
and see if the green diode comes on steady, this means that the machine is initialized and ready. Make sure the Blue-
tooth diode is not on, this means that the machine is already connected to a Tablet and therefore it cannot be coupled
to another Tablet. If the blue Bluetooth diode is off, we can continue with the coupling.
• Enter into the settings section (A) of the Android Tablet.
• In settings, we go to Bluetooth (B) in the section of wireless connections and networks:
MULTICODE SINGLE
KEY CUTTING MACHINE
73