Power Linking; Fuse Replacement - Chauvet DJ SlimPAR PRO QZ12 USB Guía De Inicio Rápida

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100-240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.

Power Linking

For the maximum number of SlimPAR Pro QZ12 USB that can be linked at 120 V or at 230 V, see the User Manual or the
Label on this product.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
SlimPAR Pro QZ12 USB QRG Rev. 4
QUICK REFERENCE GUIDE
Safety Notes.
EN
2