EN
Operating the robot
Pause
To pause the robot, press the CLEAN button on the robot or on the
remote control.
NOTE: After around 15 seconds, the robot automatically switches to stand-by. After
an additional 15 seconds, the robot goes back to home base. When the robot is on
stand-by it can be switched on by pressing CLEAN at any time.
Stop
When the robot finishes its cleaning cycle, it goes back to home
base. To manually stop the robot, press the CLEAN button on the
robot or the remote control.
Switch off
Turn the switch on the side of the robot to "O". The robot is switched
off.
18