Recommendations
•
DRV50 needs a headway of at least 8 cm so that it can go under
furniture.
•
DRV50 can go over threshold strips of a maximum thickness of
1 cm, otherwise it automatically stops or reverses.
•
DRV50 is not designed to be used on long-pile carpets, which
could cause the robot to automatically stop or reverse.
•
DRV50 is designed for a maximum surface area of 100m
•
If the robot could come across a gap while cleaning, please check
that the gap sensors are clean before using the robot.
•
DRV50 is designed for routine floor cleaning. The appliance is not
intended to replace heavy-duty cleaning.
•
Do not use the appliance on damp floors.
•
DRV50 must be used on flat surfaces.
3
EN
.
2