Treble And Bass Settings; Listening To An External Audio Source; Clock Setting - Lenco iPD-9000 DAB+ Manual De Instrucciones

IPD9000 DAB+_IB draft R03 (1).pdf IPD9000 DAB+_IB draft R03 (1).pdf
When the unit is powered on (in iPhone/iPod, CD, Aux-In , FM Radio or DAB Radio mode), you can press
t he TONE button from the remote control to enter the Bass and Treble setting mode.
Treble setting:
1. Press the TONE button once entering Treble setting mode, the "Treble" indicator displays.
2. Press the VOLUME +/- buttons from the remote control to adjust to the desired Treble level and the
"TONE" indicator displays.
Bass setting:
3. Press the TONE button again entering Bass setting mode, the "Bass" indicator displays.
4. Press the VOLUME +/- buttons from the remote control to adjust to the desired Bass level and the
"TONE" indicator displays.
Exit Bass / Treble setting mode:
5 . Press the TONE button to exit Bass / Treble setting mode.
Note: You may also directly press the TREBLE + / - button or the BASS + / - button from the main unit to
set the desired Treble and Base level.
1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the AUX IN jack of
the unit.
2. Press the STANDBY
3. To select auxiliary audio input, press the FUNCTION button. The "AUX-IN" indicator shows on display.
4. Turn on the external auxiliary audio device.
5. The volume can now be controlled through the unit.
Operate all other functions on the external device as usual.
Notes: Press the STANDBY
Don't forget to switch off the power of the external audio device as well.
Auto-setting
The unit can auto-synchronize with the DAB radio station time information.
Each time a DAB station is received and its time information will be copied to this unit automatically which
will overwrite current time setting on the unit.
Manual setting
W hen the unit is OFF (Standby mode):
Set 12/24 Hour format
1. Press the MODE button from the remote control entering 12/24 hour format setting mode.
2. Rotate the VOLUME knob or press the VOLUME + / - button from the remote control to select 12 or 24
hour display format.
Set Clock
3. Press the MODE button again and the clock hour digits blink.
4. Rotate the VOLUME knob or press the VOLUME + / - button from the remote control to set hour.
5. Press the MODE button again and clock minute digits blink.
6 . Rotate the VOLUME knob or press the VOLUME + / - button from the remote control to set minute.
Exit setting mode
7. To save all settings, press the MODE button or wait for a few seconds to exit the setting mode.
2012-5-16 2012-5-16 21:31:28 21:27:53

Treble and Bass Settings

Listening to an External Audio Source

button to turn on the unit.
button to turn off the unit when you finish listening.

Clock Setting

12