Reset Function - Retevis RT45 Manual De Instrucciones

without pushing the PTT button. The monitoring radio is not able
receive any transmissions in this mode.
TO turn Room Monitor On
1. Press Menu button until the Room monitor icon blinks.
2. Press UP or DOWN button to the desired room monitor
sensitivity level.
3. Press the LOCK button to turn on room monitor.
Press the Menu button to turn off room monitor.
Note: When the voice/noise in the monitored room continues for
more than 60 seconds, the monitoring radio stop monitoring
for 5 seconds, and resumes.
Dual watch receiver [dual scan]
Dual Scan is a user selectable feature. In dual scan, the radio looks
for activity on home channel and selected dual scan channel in the
radio.
[Dual scan:1] The user can select dual scan channel through menu,
when dual scan channel was selected, the dual scan
code is the code in dual scan channel, because our
radio have different code in each channel through
menu setting.
[Dual scan:2] when dual scan feature is enable(user selected a
dual scan channel through menu) , a dual icon
"2CH" is displayed in LCD.
[Dual scan:3] In dual scan mute state(no signal in home channel
and dual scan channel), the home channel with home
channel's code and dual scan icon in display. If home
channel is actively , the display do not change. If dual
scan channel is actively, the radio will display dual
scan channel with dual scan channel's code and dual
10
scan icon. After RX hang time, the radio will return
to home channel display.
[Dual scan:4] The dual scan is same as normal scan except this
scan have not CSQ feature.Reference scan
description , dual scan have scan mute, scan
unmute, RX hang time ,TXhang time state..

Reset function

Turn off the radio, press LOCK Button and POWER Button to
turn on the radio.
11