Warning Indications - JVC GZ-HD320 Manual De Instrucciones

Warning Indications

Indication
SET DATE/TIME!
COMMUNICATING ERROR
CANNOT USE IN
VIDEO MODE
NOT FORMATTED
FORMAT ERROR!
DATA DELETION ERROR
HDD ERROR!
MEMORY CARD ERROR!
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
DROP DETECTION WORKED AND
THE POWER IS TURNED OFF
RECORDING CANCELLED
RECORDING FAILURE
PLAYBACK FAILED
•
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult your
nearest JVC dealer.
•
Be sure to use JVC battery packs.
•
Set [REC MEDIA FOR VIDEO] to [HDD].
•
Replace the microSD card. (Files recorded with other devices
that support AVCHD cannot be played back on this camcorder.)
•
Select [OK] and select [YES] to perform formatting.
•
Check the operating procedure, and perform once again.
•
Turn off the camcorder, and turn it on again.
•
Perform formatting.
•
Turn off the camcorder, and turn it on again.
•
Perform formatting.
•
Remove and re-insert the microSD card. (MultiMediaCard
cannot be used.)
•
Remove any dirt from the microSD card terminals.
•
Insert the microSD card before switching the power on.
•
Turn off the camcorder, and turn it on again.
•
Stop video recording, and then record a still image. (If an
microSD card is removed or inserted during video recording, a
still image cannot be recorded.)
•
Set [REC MEDIA FOR VIDEO] to [SD], then record to a
microSD card.
•
Turn off the camcorder and turn it on again.
•
Prevent the camcorder from vibration and shock.
microSD card:
•
Remove and re-insert the microSD card. (MultiMediaCard
cannot be used.)
•
Remove any dirt from the microSD card terminals.
•
Insert the microSD card before switching the power on.
HDD:
•
Do not allow the camcorder to be subject to impact/vibrations.
Action
(All data is deleted.)
(All data is deleted.)

EN