Description Of Footbath - Beurer FB 50 Instrucciones Para El Uso

You must never connect the foot bath to the power supply when your feet are already in the water. If the
device is damaged, this can lead to life-threatening electric shock.
Make sure that the plug and the power cord do not come into contact with water or other liquids.
For this reason, the device must be operated as follows:
• only in dry inside rooms (e.g. never in the bathtub or sauna),
• only with dry hands,
to avoid any risk.
Never immerse the device in water. Never try to retrieve the device if it falls into water. Disconnect the plug
immediately from the mains outlet.
Fire hazard
WARNING
There is a risk of fire if the device is used incorrectly or if it is not used according to these operating instructions.
For this reason, the massage device must only be operated as follows:
• Never use the device under covers, such as blankets or pillows.
• Never use the device in the vicinity of petrol or other easily flammable materials.
• Do not place on soft carpeting because the vents may be covered.
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Keep the device away from high temperatures.
• Never stand in the foot bath.
• The device must not be connected to the power supply while being filled.
• Always switch the foot bath off and remove the plug from the mains socket before moving it or cleaning it.

4. Description of footbath

8
11
5 6
1 2
1
2
5
7
4 a
b
3
6
c
Display
4
1 button
2 Massage button
3 Bubble button
4 Timer button
5 Temperature button
6 LC display
3
1 Spray guard
2 LED display
3 Infrared light
4 Removable pedicure attachments
a Massage attachment
b Brush
c Corn and callous remover
5 Bubble bar
6 Level indicator
7 Massage roller
8 Massage-supporting footbed
9 Rubber feet (bottom of device)
10 Cord winder (bottom of device)
11 Narrow side
12
10
9