,,_ WARNING
CRITICAL
INSTALLATION
WARNINGS
•
Do not install the refrigerator in a damp
location or place where it may come in
contact with water.
Deteriorated insulation on electrical parts may
cause an electric shock or fire.
•
Do not place this refrigerator in direct sunlight
or expose it to the heat from stoves, room
heaters, or other appliances.
•
Do not plug several appliances into the same
multiple power strip.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the voltage listed
on the refrigerator's rating plate.
This provides the best performance and
also prevents overloading of house wiring
circuits, which could cause a fire hazard from
overheated wires.
•
If the wall socket is loose, do not insert the
power plug.
There is a risk of electric shock of fire.
•
Do not use a power cord that has cracks or
abrasion damage along its length or at either
end.
•
Do not bend the power cord excessively or
place heavy objects on it.
•
Do not twist or tie the power cord.
•
Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects, or
push the power cord into the space behind the
appliance.
•
When moving the refrigerator, be careful not to
roll over or damage the power cord.
This may result in an electric shock or fire.
•
Never unplug your refrigerator by pulling on the
power cord.
Always grip the plug firmly and pull straight out
from the outlet.
Damage to the cord may cause a short-circuit,
fire, and/or electric shock.
•
Do not use aerosols near the refrigerator.
Using aerosols near the refrigerator may cause
an explosion or fire.
•
Do not install this appliance near a heater or
inflammable material.
•
Do not install this appliance in a humid, oily,
or dusty location, or in a location exposed to
direct sunlight or water (rain, etc.).
•
Do not install this appliance in a location where
gas may leak.
This may result in an electric shock or fire.
•
This refrigerator must be properly
located and installed in accordance
with the instructions in this manual
before you use it.
•
Connect the power plug in the proper position
with the cord hanging down.
If you connect the power plug upside down, the
wire can get cut off and cause a fire or electric
shock.
•
When moving the refrigerator, be careful not to
roll over or damage the power cord.
This constitutes a fire hazard.
•
Make sure that the power plug is not crushed
or damaged by the back of the refrigerator.
•
Keep the packing materials out of reach of
children.
There is a risk of death from suffocation if a
child puts the packing materials on his or her
head.
•
The appliance must be positioned so that the
plug is accessible after installation.
Failing to do so may result in an electric shock
or fire due to electric leakage.
•
You need to remove all the protective plastic
film before you initially plug the product in.
•
Children should be supervised to ensure that
they do not play with the fastener.
There is a risk of death from suffocation if a
child swallows the fastener.
Pay special attention to children because it can
be dangerous.
Keep the fastener out of reach of children.
•
The refrigerator must be safely
grounded.
Always make sure that you have grounded the
refrigerator before attempting to investigate or
repair any part of the appliance.
Power leakages can cause severe electric
shock.
Never use gas pipes, telephone lines, or other
potential lightning attractors as an electrical
ground.
Improper use of the grounding plug can result
in a risk of electric shock.
Engl sh - 3