Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.Take o ut t he lower basket (2)bylifting the
basket upfrom the rail system.
4. Press the fixing hook o fthe rail system.
5. Holding
the top ofthe Freezer
Drawer,
pull it
out a ll t he way, and then remove itfrom the rail
system.
CAUTION
Be careful not to scratch or dent the sliding rail by
letting it strike the floor.
/h CAUTION
Make sure that you mount the freezer basket in the
right position when removing / installing the freezer
door. Failing to do so may result in the door not
opening or closing properly.
Z_ CAUTION
O
X
RE-ASSEMBLE
THE FREEZER
DRAWER
To reattach the drawer after you have moved the
fridge to its final location, assemble the parts in
reverse order.
LEVELING
THE REFRIGERATOR
Make sure the refrigerator is level so that you can
make final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation
and increased energy bills.
Below is an example of how to level the refrigerator
if the left side of the refrigerator is lower than the
right side.
How to adjust the level
1. Open the freezer drawer and remove the lower
basket.
2. Insert a flat-blade screwdriver (-) into a notch on
the left control lever, and then turn it counter-
clockwise to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise
to raise it.)
flat-blade
Control
Lever
screwdriver
{-)
1"
Engl sh - 15
Publicidad
Tabla de contenido
