Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
SOWTWON
Auto
close
system
•
Is 1here an imbalance between the right and let1 parts of the door?
does
not work
with
• Open and close the door smoolhly
1 -_2times.
the
freezer
door.
After you do this, the auto close system usually works properly again.
® lry opening the door smoothly to avoid unbalancing the right and the left part of the
door.
®
®
Condensation
or
water
drops forms
on both sides
of fridge
door's
central
part,
What Do I Need to
Use the E=Srnart
and Smart Grid
functions?
Condensation
or water drops may form if the humidity is too high while the
refrigerator is operating.
If condensation
or water drops appears on both sides of fridge door's central part,
turn the Energy Saver mode off after removing the condensation.
(See the explanation of the Energy Saver button in "Using the Control Panel" on page
21 .)
lo use the Smart Grid (Demand Response) and E-Smart function on your
Refrigerator, you need the following devices and apps:
Devices: 1) Wireless Router, 2) Samsung E-Smart Refrigerator, 3) Smartphone
(Recommended:
Galaxy S4,Galaxy Note3/Android
OS Jelly bears)
Applications:
1) "Samsung E--Smart App" from the Google Play Store or Samsung
Apps.
You also need to:
® Connect the Refrigerator and the Smartphone
to the same Wi-Fi network in your
home.
® Install and run Samsung E--Smart App ors your Smartphone
(to use the Samsung
E-Smart function).
® In addition, to use the Smart Grid (Demand Response) function, you must Register for
the service with your electric company.
The company must have an EMS (Energy Management
System) that supports SEP
(Smart Energy profile).
Why
isn't the
E=Srnart
function
working
normally?
®
®
Why
isn't the
Delay
•
Defrost
Capability
working
normally?
®
®
Confirm that the router in your home and the Internet are working properly.
Connect a Smartphone
to the router (AP, Access Point), and thers confirm that you
can browse the ksternet ors the phone.
Confirm that refrigerator is connected to the AR
Check the E-Smart icon on the PANEL of refrigerator.
If the refrigerator is connected,
the icon will be ors.
Confirm that the refrigerator and Smart Phone are connected to the same router.
Confirm that the router in your home and the Internet are working properly.
Connect a Smartphone
to the router (AP, Access Point), and thers confirm that you
can browse the Internet ors the phone.
Confirm that the area where you live is properly entered into the Smart phone App.
Confirm that the Smart Grid function works correctly.
(Check the F_,NEL. L3 andL4 should not be displayed on the PANEL)
Engl sh- 44
I
I
Publicidad
Tabla de contenido
