Controlling Headset Volume; Placing And Receiving Calls - Motorola HS810 Guia Del Usuario

Using Your Headset
The headset will only automatically initiate a paired connection (via opening
the boom) with the last device it was connected to. If you want to connect
the headset to another device in the paired device list, you must initiate the
connection from that device. Whichever of the eight devices initiates a
connection to the headset afterwards, that device then becomes the "last
connected" device.

Controlling Headset Volume

Increasing and Decreasing Volume
To increase speaker volume, press the top volume button repeatedly until you
reach the desired volume level.
To decrease speaker volume, press the bottom volume button repeatedly until
you reach the desired volume level.
Volume Orientation Technology
To change the volume button orientation for left or right ear:
Step
1 With the headset's boom closed, press and hold the Multifunction E
button until the headset indicator turns on (about 3 seconds).
2 Press the volume button that you want to use as the volume up. The
headset indicator will flash several times to indicate success.
Repeat the above steps anytime to change the volume button orientation.
14
Using Your Headset

Placing and Receiving Calls

Your headset supports both Hands Free and Headset Profiles. Accessing call
functions depends on which profile your phone supports.
Note: Some phones do not support all features listed. Please consult you
phone user's guide.
You can activate call functions for both Hands Free and Headset Profiles
according to the following table:
Device Status
Function Phone
Enter Pairing On
(Configuration)
Mode
Make a Voice On in idle
Dial Call
Dial a Number On–user
dials number
Redial a On–Voice
Number dialing turned
on or off
End a Call On–in call
Action
Headset Hands Free Profile
Press & hold E until LED remains lit.
Off
Release E, open boom.
(boom
closed)
Short press E,
On
speak name, phone
dials call
On N/A
Long press E
On–
(Idle)
Short press E
On
Headset Profile
Press E, speak
name, phone dials call
Press E, call is sent
Press E, (recalls last
phone number)
Press E, (call is sent)
Press E
15