Using Your Headset Indicators - Motorola HS810 Guia Del Usuario

Using Your Headset
Device Status
Function Phone
Put Active On–in call
Call On Hold
Receive a On–phone
Call rings
Reject a Call On–phone
rings
Answer 2nd On–in call,
incoming call 2nd call
coming in
Toggle On–in call,
between two 2nd call on
active calls hold
Transfer call On–in call
from phone to
Headset
Note: If the link is abnormally disconnected (e.g., out of range) the headset
tries to reestablish the link.
16
Using Your Headset

Using Your Headset Indicators

Headset Indicator (LED)
With charger plugged in:
Headset Indicator
ON
OFF
With no charger attached:
Headset Indicator
OFF
ON (steady)
10 rapid flashes
flashes at a 3-second interval
(.1 seconds ON 2.9 seconds OFF)
pulses at an 8-second interval
(2.0 seconds ON, 6.0 seconds OFF)
Note: When the wireless headset is paired to the phone and there is no
activity for 5 minutes, the blue flashing LED turns off. Any button press on the
headset will reawaken the headset and the flashing resumes. If you press the
up and down volume buttons simultaneously during a call, the pulsing LED
turns off for the duration of that call.
Action
Headset Hands Free Profile
Long press E
On
Short press E (call
On
is answered)
Long press E
On
Long press E,
On
places 1st call on
hold, answers
incoming call
Long press E
On
Short press E, (call
On
transferred to
headset)
Headset
charging in progress
charging complete
Headset
power off
pairing mode
pairing successful
standby (not on a call)
connected (on a call)
Headset Profile
N/A
Press E (call is
answered)
N/A
N/A
N/A
Press E (call
transferred to
headset)
17