Presetting Programs - Denon DN-C630 Instrucciones De Operación

4
POWER
COMPACT DISC PLAYER DN-C630
OPEN / CLOSE
TRACK
STOP CUE PLAY / PAUSE
PHONES LEVEL
MIN MAX
PRESET
2 ,2
-2

(4) Presetting Programs

• Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback
mode is set automatically.
• Programs can be stored for up to three discs.
Input the program.
1
Follow the instructions under "(1) Inputting the Program"
to input the program. (See Page 17.)
Set the preset mode.
2
Follow the instructions under "(2) Presetting Procedure"
-1
to set the preset mode. (See Page 21.)
Select the preset item.
Turn the select knob to select "Program 1" (or "Program
2" or "Program 3").
2
-2
Select one of these
Change the preset setting.
Press the select knob.
The character display changes as follows:
2
-3
Before change
Cancel the preset mode.
Press the PLAY MODE button.
PLAY
MODE
2
-4
The preset setting mode is canceled and the set
return to the normal mode.
2
-4
TIME
0%
PLAY
END MON INDEX REPEAT A-B PITCH
MODE
SEARCH PROG.PLAY PROG. IN
ON / OFF
-3
After change
To play a preset disc:
Load a disc for which a program is preset.
PROG.PLAY
CUE
ON / OFF
3
Lit
The pickup searches for the first programmed track and
the standby mode is set.
Start programmed playback.
Press the PLAY/PAUSE button.
Lit
4 PLAY / PAUSE PLAY / PAUSE
NOTE:
The playing time may not be displayed properly during
programmed playback of discs without CDR TOCs.
ENGLISH
Lit
PROG
Lit
Off
CUE
19