Presetting Procedure; Preset Mode - Denon DN-C680 Instrucciones De Operación

(2) Presetting Procedure

¥ Functions can be preset using the buttons on the front panel.
¥ The presettings can also be set using serial remote signals
(RS232C/RS422A).
¥ Make the presettings with no disc loaded, in the stop or
standby mode.
B
PROFESSIONAL CD PLAYER DN-C680
POWER
OPEN/CLOSE
¢ ON £ OFF
LEVEL
PROG. PLAY PROGRAM
ON/OFF
PUSH ENTER
MIN MAX 8
STOP STANDBY/CUE PLAY/PAUSE
PHONES
PRESET
1 2,3
Enter the preset mode.
Press the STANDBY/CUE button while pressing the PLAY
MODE button.
1
STANDBY/CUE
PLAY MODE
Select the preset item.
Turn the select knob (
8
PUSH ENTER
8 9
Turn the knob
clockwise to move
in the direction of
2
the arrows,
counterclockwise
to move in the
opposite direction.
NOTE: The first preset item displayed is the last preset item
displayed the last time the presettings were made.
Change the preset values.
Press the select knob.
PUSH ENTER
8 9
The character display changes as shown below.
3
Before change
1,4
FINISH MODE SEARCH I 6 7 SCAN
IN PLAY MODE END MON AUTO CUE TIME STOP
PITCH REPEAT
9 AUTO SPACE INDEX NEXT
I A
AUTO EDIT FADER RECUE
B
Character display

Preset Mode

).
9
Character display
After change
Exit the preset mode.
Press the PLAY MODE button.
4
PLAY MODE
The preset mode is canceled and the set
returns to the previous mode.
To set the presettings back to the initial settings (the
settings set upon shipment from the factory), turn the
power on while holding in both the PLAY MODE and the
END MON buttons. For the initial settings, refer to Ò (1) List
of preset functionsÓ .
5
The character display changes as
shown below.
PLAY MODE END MON
NOTE:
If the message shown below appears, there is a problem with
the preset memory. Contact a serviceperson.
Initial Error
ENGLISH
23