Presetting Procedure - Denon DN-C630 Instrucciones De Operación

(2) Presetting Procedure

• Functions can be press using the buttons on the front
panel.
• Make the presettings with no disc loaded, in the stop or
standby mode.
POWER
COMPACT DISC PLAYER DN-C630
OPEN / CLOSE
TRACK
STOP CUE PLAY / PAUSE
PHONES LEVEL
MIN MAX
PRESET
1 2.3
Enter the preset mode.
Press the CUE button while pressing the PLAY MODE
button.
1
Select the preset item.
Turn the select knob (
8
Turn the knob
2
clockwise to move in
the direction of the
arrows,
counterclockwise to
move in the opposite
direction.
Change the preset values.
Press the select knob.
The character display changes
as shown below.
3
Before change
1.4.5
TIME
0%
PLAY
END MON INDEX REPEAT A-B PITCH
MODE
SEARCH PROG.PLAY PROG. IN
ON / OFF
5
Character display
– ).
9
Character display
After change
Exit the preset mode.
Press the PLAY MODE button.
PLAY
MODE
4
The preset mode is canceled and the set
returns to the previous mode.
To set the presettings back to the initial settings (the
settings set upon shipment from the factory), turn the
power on the while holding in both the PLAY MODE and
the END MON buttons. For the initial settings, refer to "(1)
List of preset functions".
5
The character display changes as
shown below.
NOTE:
If the message shown below appears, there is a problem
with the preset memory. Contact a serviceperson.
Initial Error
ENGLISH
21