Product Information; General Information; English - Pahlen 300A Manual De Instrucciones

Pool lighting type 300

Product information

Luminaire for installation in different types of swimmingpools.
Available in two designs: Classic and Marine, as well as pool type design A for concrete casting (concrete pool dressed with tiles
or mosaik) and CA for any pool frame covered with liner.
The pool light shall be connected through an isolation transformer 12V AC 60W alternativly 300W.
If several lamps are to be installed, these should all connect to the same transformer and by the same switch, see circuit dia-
gram in the instruktion enclosed with the lamp.

General information

Recommended values for water quality:
Total chlorine content: max 3.5 mg/liter (ppm)*
Chloride (salt) content: max 250 mg/liter
pH-value: 7.2–7.6
Alkalinity: 60–120 mg/liter (ppm)
Calcium hardness: 100–300 mg/liter (ppm)
Iron: max 0.1 mg/l *
Copper: max 0.2 mg/l *
Manganese: max 0.05 mg/l *
Phosphorus: max 0.01 mg/l *
Nitrate: max 50 mg/l *
Outside these values the product warranty does not apply.
Dimensions
Marine
Classic
Type 300CA
Ø288
 288
Ø172
Ø170
Type 300CA

288
Ø288
 288 Surface treatment
E
The tolerance class in accordance with this
part of ISO 2768-1
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Ø172
Ø172
Surface treatment
E
The tolerance class in accordance with this
part of ISO 2768-1
Surface treatment
Box 728, SE-194 27 Upplands Väsby, Sweden
E
Phone +46 8 59411050, Fax +46 8 59086880
The tolerance class in accordance with this
part of ISO 2768-1
* Complies to EN 16713-3
 288
Ø172
140 25
140 25
 288 Designed by: Drawn by: Date
ASA 2011-09-29
Assembly drawing no. Art.no. 124X9Y
Scale
Belysning 300CA LED
Drawing number
M11446 2
Ø172
140
21
140 21 16,4
36
140
Designed by: Drawn by: Date
ASA
Assembly drawing no. Art.no.
Scale
Belysning 300A LED
Typ 300 - Classic
9
Drawing number
Designed by: Drawn by: Date
ASA 2018-07-24
Assembly drawing no. Art.no.
Scale
Belysning 300CA LED

ENGLISH

Type 300A
36
36
140
140
Type 300A
Surface treatment
E
The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768-1
Belysning 300A LED
Marine
Approved by:
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Revised by: Date
ASA 2016-12-15
Rev.no.
36
36
140
140
Approved by: Surface treatment
E
XXXXXX The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768-1
Revised by: Date
Belysning 300A LED
ASA 2016-12-15
Typ 300 - Classic
Rev.no.
M12924 0
Approved by:
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Revised by: Date
22
22
Designed by: Drawn by: Date Approved b
ASA 2011-11-03
Art.no.
124X81
Scale Revised by:
ASA 2
Drawing number
M11562
16,5
16,4
Designed by: Drawn by: Date Approved by:
ASA
Art.no. XXXXXX
Scale Revised by: Date
ASA 2016-12-
Drawing number Rev.no.
M12924 0