Troubleshooting; Technical Specifications - Vortice VortDispenser Go Manual De Instrucciones

ENGLISH

Troubleshooting

Problem
Little or no
solution
coming out
Sensor not
reacting to
hands

Technical Specifications

Characteristic
Batteries
Capacity
Flow Rate
Dimensions
14
Solution
Repeat 5 to 10 cycles to fill the tubes with solution.
Check the tank is not empty.
Check the batteries are not low.
Check the vent hole on top of the seal is not blocked.
Check the unit is turned on.
Clean the nozzle.
Check the unit is turned on.
Check there is nothing blocking the sensor.
Clean the sensor located by the nozzle.
Check the batteries are not low.
Value
4 AAA (Not included)
400 ml
1 ml/use
21.4 cm x 11.6 cm x 7 cm