Turbosaver TS-SV60WI Manual De Instrucciones página 13

The vacuum sealing system #1
• Make sure system is at room temperature.
Check for signs of damage including pulled cord or physical damage to system or hea-
ters. If any signs of physical damage are found, please send back to factory for replace-
ment parts.
Install the skirt
Hold and press the clamp, align the unlocking symbol and the arrow, rotate the skirt in
clockwise direction until you can see the arrow and locking symbol are in the same hori-
zontal position.Be cautious with the stainless steel propeller when it crosses over the hole
of the stainless steel skirt.
Uninstall the skirt
Hold and press the clamp,rotate the skirt in anticlockwise direction to take off the skirt.
Be cautious with the stainless steel propeller in case it hits the stainless steel skirt.
13