Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Do not use the sliding system of the boiler to load
pellets into the container.
Removing the stove:
To remove the stove, proceed as follows (Fig. 6.3):
1. Open the door;
2. remove the safety bracket (A - fig.6.3) by
undoing its two bolts
3. lower the lever to release the sliding mechanism
(B - g.6.3)
4. extract the stove by gripping the interior of the
combustion chamber.
This actuates a safety microswitch which turns off
the electrical power supply.
Fitting the stove:
To t the stove, proceed in the reverse order:
lower the lever to release the sliding mechanism
(B - g.6.3)
push the stove into its seat until you are sure
the automatic locking mechanism has engaged
restore the safety bracket and secure it with
its two bolts
close the door
Electrical power is restored by the safety microswitch.
34
A
B
Fig. 6.3
Publicidad
Tabla de contenido
