How To Change The Vacuum Bag; Edge Cleaning Feature; Handle Adjustments - Tennant V-LWU-13 Manual De Operación Y Partes

Always operate the vacuum cleaner with a vacuum bag installed.

How to Change the Vacuum Bag

CAUTION: First, unplug the vacuum cleaner from the electrical outlet.
1. Unzip outer cloth bag. (Fig. 10)
2. Remove used bag by pressing the bag holder tab and pulling bag off vacuum (Fig. 11). Discard used bag.
3. To install new bag, position the bottom of the bag collar into the bag collar holder.
4. Push the top of the bag collar inward until the collar "snaps" into place under the bag holder tab. (Figs. 12-13)
5. Zip the outer cloth bag closed.
(Fig. 10)
The Edge Cleaning Feature provides improved
cleaning of carpets near walls and stationary furni-
ture. For maximum edge cleaning, use the left side
of the vacuum near walls or stationary furniture.
The handle on this vacuum cleaner can be set to one of three positions – upright, working or low.
How to Adjust the Handle
1. Upright position – for storage (Fig. 14). Handle locks in this position.
2. To release the handle, step on the left rear corner of the vacuum cleaner and pull handle back. (Fig. 15).
3. Working position – for normal cleaning (Fig. 16).
4. Low position – for cleaning under furniture (Fig. 17).
(Fig. 14)
HOW TO CHANGE THE VACUUM BAG
(Fig. 11)

EDGE CLEANING FEATURE

HANDLE ADJUSTMENTS

(Fig. 15)
(Fig. 12)
(Fig. 16)
7
(Fig. 13)
(Fig. 17)