How To Change The Vacuum Bag - Tennant V-BP-6 Manual De Operación Y Partes

5. Attach the two-piece extension wand to the vacuum hose and attach the desired cleaning tool.
(Fig. 12 and Fig. 13).
6. Plug the extension cord into a 120V grounded outlet. Always unwind the cord completely before vacuuming. It is
important to maintain the power cord in good condition.
7. Clip the on/off switch to the waist belt and turn the backpack vacuum cleaner to the on position (Fig. 14).
Fig. 12
CAUTION:
Always operate the backpack vacuum cleaner with a vacuum bag installed.

How to Change the Vacuum Bag

1. Turn off main power switch and unplug unit from wall outlet. (Fig. 15).
2. Remove vacuum hose from lid. (Fig. 16).
3. Release the two latches and lift off lid. (Fig. 17).
4. Separate lid from paper bag and dispose of paper bag. (Fig. 18).
5. Remove cloth filter bag, clean, dust and replace. (Fig. 19).
6. Insert new paper bag making sure to align lid nozzle with bag hole and refasten latches. (Fig. 20).
Fig. 13
Never operate the Backpack vacuum cleaner if the power cord is damaged in
any way. If power cord is damaged, replace power cord immediately.
How to Change the Vacuum Bag
Fig 15
Fig 18
Fig 16
Fig 19
7
Fig. 14
Fig 17
Fig 20