CRISP CONVECTION
Benefits of Crisp Convection:
This crisp convection feature is best for light colored
and delicate baked goods like cakes, tarts, cookies,
puff pastries, scones, muffins, biscuits, free from
yeast breads etc. The fan circulated hot air continually
distributes heat more evenly than the natural
movement of air in a standard thermal oven. This
movement of hot air maintains cooking foods more
evenly, crisping surfaces while sealing in moisture and
yielding crustier breads. The low thermal capacity of
the heating element itself makes it possible to shorten
the cooking time as much as 30%.
The meat probe may be used in this feature.
Tips for Crisp Convection
• Time reductions will vary depending on the amount
and type of food to be cooked. Choose cookie
sheets without sides and roasting pans with very
low sides to allow heated air to circulate around the
food. Food baked on pans with a dark finish will
cook faster.
• When using Crisp Convection with a single rack,
place oven rack in position C. If cooking on multiple
racks, place the oven racks in position B and D.
• It is important to uncover foods so that surfaces of
food remain exposed to the circulating air, allowing
browning and crisping.
• Keep heat loss to a minimum by only opening the
oven door when necessary.
22
To set the oven for Crisp Convection 375˚F:
Touch CLEAR/OFF.
Crisp
Touch Crisp Conv.
Conv.
3
7
5
Touch 3, 7, and 5.
Touch START. The display will
show 350˚F. The preheat (If
Convection Auto Conversion
is Enabled) melody will sound
when the oven temperature
reaches adjusted temperature.
But if you set the Convection
Auto Conversion disabled, the
melody will sound when the
oven temperature reaches
375˚F.
IMPORTANT NOTE:
The heating elements and a fan turn off immediately
when the door is opened. They will turn on again in
approximately 5 seconds after the door is closed. If
you leave the oven door open for more than 30
minutes, all settings are canceled.
Touch CLEAR/OFF to cancel Crisp Convection at any
time.
NOTE:
After any cooking cycle has been completed cooling
fans will operate to protect the control panel. This is
normal.