Bissell POWERLIFTER 2019 Serie Guia Del Usuario página 8

Cleaning the Pre-Motor Filter
1
3
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate the vacuum with damp or wet filters, without the bag in place, or with the
bag door missing. Allow components to dry before reassembling the unit.
8
www.BISSELL.com
Remove the
bag door cover
by pressing
the latch down
and pulling the
door off.
Remove the
pre-motor
filter. Clean
it with warm
water. Once
it's clean and
dry, put it back
into the unit.
2
Locate the filter
on the left side
at the bottom
of the bag
compartment.
You may need to
lift the bag out of
the way to find it.