Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Drilling performance
indicator: Contact pressure
is too low
Drilling performance
indicator: Optimum contact
pressure
For 120 V
Rated current limit has
been exceeded
Drilling performance
indicator: Contact pressure
is too high
Status bar for information
Status bar for warning
messages
Bluetooth ON
Bluetooth OFF
10
English
The diamond core drilling machine is drilling and the hole-starting mode
is not activated. The information displayed helps ensure that the diamond
core drilling machine is being operated in the optimal range.
•
Background color: Yellow.
Contact pressure is too low. Increase the contact pressure.
The diamond core drilling machine is drilling and the hole-starting mode is
not active. The information displayed helps ensure that the diamond core
drilling machine is being operated in the optimal range.
•
Background color: Green.
Contact pressure is at the optimum level.
The diamond core drilling machine is drilling and the hole-starting mode is
not activated. Rated current has exceeded the limit of 20 A.
•
Contact pressure is too high. Reduce the contact pressure.
The diamond core drilling machine is drilling and the hole-starting mode
is not activated. The information displayed helps ensure that the diamond
core drilling machine is being operated in the optimal range.
•
Background color: Red.
Contact pressure is too high. Reduce the contact pressure.
The status bar displays various information regarding the machine's current
status, such as the gear engaged or the activated hole-starting mode.
The status bar displays various warnings regarding the tool's current
status which do not result in the diamond core drilling machine stopping
immediately.
Bluetooth is activated in the basic setting.
To switch off the Bluetooth function, press and hold down the buttons
and
simultaneously for 10 seconds with the motor switched off.
•
This information is shown in the display only for a few seconds.
Bluetooth is deactivated. The diamond core drilling machine cannot be
connected to additional device or accessories.
To switch on the Bluetooth function, press the buttons
neously with the motor switched off.
•
This information is shown in the display only for a few seconds.
and
2279864
*2279864*
simulta-
Publicidad
Tabla de contenido
