Ants Les01 Band Data - Kübler LES01 Instrucciones De Utilizacion

Air pressure
Service life
Degree of protection
Supply voltage
Output
Sensor cable
Maximum distance from an evaluation
unit
Permissible swinging of the encoder
in transverse direction (swinging of
the elevator cabin normal to the travel
direction)
The connection assignment of the 5-pin picoMAX® eCOM plug is pre-confi gured for use directly on
the PSU01. The individual wires are assigned as follows and can be connected to other PSUs accor-
dingly. In this case, the operating manual of the respective evaluation unit must be observed! Please
ensure the correct connection of cables; otherwise the device will not function properly.
Colour
Brown
White
Green
Yellow
Shield

3.2 Ants LES01 band data

Characteristics
Material
Dimensions
Max. length
Heat expansion coeffi cient
EN - page 12 (R60200.0009 4)
800-1013 hPa (up to 2000 m above NN)
20 years
IP30
24 VDC, low voltage SELV or PELV
< 5 watts
Supplied: 5 m, 2 x 2 twisted pair 0.14 mm
100 m (CAN bus), twisted pair 0.75 mm
10 mm
Connection
24 VDC
0V / GND
CAN High
CAN Low
GND / CAN GND
Value
V2A stainless steel
16 mm x 0.4 mm
392 m
16 * 10 / K, between 20-100 degrees Celsius.
-6
, with sheath
2
, with sheath
2