Buttons Description - FanWorld FW6 Serie Manual De Instalación Y Usuario

Buttons description

8
9
10
11
12
13
14
15
1 ON/OFF .
*
Press this button to turn on/off the unit.
*
This will clear the existing timer and SLEEP settings.
2.
*
Press this button to set the temperature display to Fahrenheit,
which is displayed by default in Celsius. The "℃" will not be
displayed on the LCD.
*
Press this button again to restore the temperature display
to Celsius.
Note: Temperature display in Fahrenheit is not available for some
models. When temperature is displayed in Fahrenheit on the
remote controller, it might be in Celsius on the unit, the function
and operation of which will not be affected.
3. SPEED
* Press this button, you can select the fan speed as follows:
Low
Mid
Note: AUTO air speed is not available in FAN mode.
This unit must be installed by a professional according: RD 795/2010, RD 1027/2007 and RD 238/213.
REMOTE CONTROLLER
Note:
The remote controller
display all symbols
during power-on and
only those
1 corresponding to
current operation the
2
rest of the time.
3
4
iFEEL
5
6
7
Auto
High
58