Husqvarna W520i Manual Del Usuario página 19

occur. Let your dealer help
you select the right equipment.
• Use heavy-duty slip-resistant
boots or shoes. Do not use
open shoes or go with bare
feet.
• Use heavy, long pants.
• Use protective gloves when
necessary, for example when
you attach, examine or clean
the cutting equipment.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
• Do not use a product with
defective safety devices.
• Do a check of the safety
devices regularly. If the safety
devices are defective, speak
to your Husqvarna service
agent.
To do a check of the cutting
cover
The cutting cover decreases
vibrations in the product and
decreases the risk of injury from
the blade.
• Examine the cutting cover to
make sure that there are no
damages such as cracks.
1484 - 005 - 23.09.2020
Safety key
The safety key is below the
battery lid. The safety key
connects the battery that
supplies the motor with power.
To do a check of the safety key
The safety key connects the
battery that supplies the motor
with power.
• Start and stop the motor. If
the safety key operates
correctly, the motor can only
start when the key is in the
safety lock.
Motor brake handle
The motor brake handle stops
the motor. When the motor
brake handle is released, the
motor stops.
To do a check of the motor
brake, start the motor and then
release the motor brake handle.
If the motor does not stop in 3
seconds, let an approved
Husqvarna service agent adjust
the motor brake.
(Fig. 20)
To examine the start inhibitor
Do a check of the start inhibitor
to make sure that it prevents
operation of the motor.
19