Battery Charger; Control Panel - Husqvarna W520i Manual Del Usuario

Ocultar thumbs Ver también para W520i:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LED on the battery
The error LED flashes
The error LED is on

Battery charger

LED on the battery
charger
The error LED flash-
es
The error LED is on

Control panel

Error code (Number
of flashes)
1
5
8
9
10
Other errors
28
Possible faults
The battery is weak
The temperature in the work environ-
ment is too high or too low
Overvoltage
Cell difference too much (1V)
Possible faults
The temperature in the work en-
vironment is too high or too low
Possible faults
The transmission motor is too hot.
The motor speed decreases too much, and
the motor stops.
The battery is weak.
Battery error or no signal from battery.
The motor control is too hot.
If other errors occur, remove the safety key and the battery and speak to an approved serv-
ice agent.
Possible procedure
Charge the battery. See
Use the battery in temperatures between -10°C
and 40°C.
Check that the mains voltage is the same as on
the rating plate on the product.
Remove the battery from the battery charger. Wait
5 seconds and try again to charge the battery. If
the problem continues, speak to an authorised
service agent.
Speak to an approved service agent.
Possible procedure
Use the battery charger in temperatures between 5°C
and 40°C.
Speak to an approved service agent
Possible procedure
Let the product become cool. Make sure that
the transmission does not have grass on it.
Clean the transmission cover if it is necessa-
ry.
Clean the cutting deck and increase the cut-
ting height. Refer to
on page 24 . If the error stays, speak to your
approved service agent.
Charge the battery. Refer to
battery on page 24 .
Put the battery in the product correctly and
examine the battery connector. If the error
LED on the battery flashes, refer to
on page 24 .
Stop the motor and wait until it is cool.
Battery on page 27 .
To set the cutting height
To charge the
Battery
1484 - 005 - 23.09.2020

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido