VGC/CVGC Orifice Locations
VGC/CVGC530
VGSU/CVGSU530
Burner
Left Front (A)
Left Rear (B)
.037 (0.94 mm) PB040202
.037 (0.94 mm) PB040202
Center (B)
Right Rear (C)
.030 (0.76 mm) 044710-000
Right Front (D)
.028 (0.71 mm) PB040275
B
A
Burner
Left Front (A)
Left Rear (B)
Center (B)
Right Rear (C)
Right Front (D)
*Burner rates will be lowered by 4% per 1000 ft. above altitudes of 2000 ft.
When the conversion is completed, complete the enclosed conversion label and place it next to the rating label.
The rating label for your cooktop is located on the exterior bottom panel of the burner box in the right rear corner.
PROPER LIGHTING AND SHUTDOWN INSTRUCTIONS
1. To ignite the surface burners, turn the knob counter clockwise to any position.
2. Upon ignition of the surface burner, turn the knob to the desired position, (HI, Med, or Low).
3. To shutdown the burner, turn knob clockwise to the OFF position.
4. In case of failure, shut the gas OFF using the installer supplied manual shut-off valve.
LP
.046 (1.17mm) PB040199
B
C
D
30"W. Model
16,500 BTU LP
(4.9 kW LP)
11,000 BTU LP
(3.3 kW LP)
11,000 BTU LP
(3.3 kW LP)
7,000 LP
(2.1 kW LP)
6,000 BTU LP
(1.8 kW LP)
VGC/CVGC536
VGSU/CVGSU536
Burner
Left Front (A)
Left Rear (B)
Center Rear (C)
Center Front (C)
Right Rear (E)
Right Front (D)
B
A
Burner
Left Front (A)
Left Rear (B)
Center Rear (C)
Center Front (C)
Right Rear (E)
Right Front (D)
3
LP
.046 (1.17mm) PB040199
.034 (0.86 mm) 044711-000
.037 (0.94 mm) PB040202
.037 (0.94 mm) PB040202
.030 (0.76 mm) 044710-000
.028 (0.71 mm) PB040275
C
E
C
D
36"W. Model
16,500 BTU LP
(4.9 kW LP)
9,000 BTU LP
(2.7 kW LP)
11,000 BTU LP
(3.3 kW LP)
11,000 BTU LP
(3.3 kW LP)
7,000 LP
(2.1 kW LP)
6,000 BTU LP
(1.8 kW LP)