Vacuum Dust Extraction; Dust Box For Internal Vacuum Extraction; Reducer Piece; Attaching / Detaching Sanding Sheets - Parkside XQ2 SE Instrucciones De Utilización Y De Seguridad

Preparing for use
note! Always switch on the delta sander before
bringing it into contact with the workpiece material.
Switching on the device:
j
Move the oN / oFF switch
into the "oN" position.
Switching off the device:
j
Move the oN / oFF switch
the "oFF" position.

Vacuum dust extraction

Q
WArnIng! DAngEr oF FIrE! There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the
vacuum's dust bag) may ignite, e.g. as a result of
flying sparks generated when abrading metals or
metal objects left in wood. This can happen partic-
ularly if the wood dust is mixed with paint residue
or other chemicals and the abraded particles are
hot from prolonged abrasion. Therefore you must
empty the device's dust collection box and the
vacuum cleaner's dust bag before taking a break
or stopping work and always avoid overheating of
the abraded particles and the device.
Wear a dust mask!
WArnIng!
Always pull the mains plug is
out of the socket before doing any work on the
device.
Dust box for internal
Q
vacuum extraction
Connection:
j
Push the dust box for internal vacuum extraction
on to the hand-held sander until it engages.
4
28 GB/MT
removal:
j
downwards
8
Q
upwards into Connection:
8
j
j
removal:
j
j
Q
of the socket before doing any work on the device.
Attaching:
j
Detaching:
j
Q
of the socket before doing any work on the device.
j
Sanding and surfaces:
The sanding output and the quality of the surface
finish are determined by the grade of grit on the
sanding sheet.
Press the release button
box for internal vacuum extraction
withdraw it towards the rear of the device.

reducer piece

Push the reducer piece
port .
2
Push the hose of a suitable dust extraction de-
vice approved for that purpose (e.g. a workshop
vacuum cleaner) on to the reducer piece
Pull the dust extraction device hose off the
reducer piece .
3
Pull off the reducer piece
Attaching / detaching
sanding sheets
WArnIng!
Always pull the mains plug is out
Sanding sheets are attached to the backing plate
by means of the hook and pile fastening.
7
Simply pull the sanding sheet off the backing
plate (see Fig. C).
7

rotating the backing plate

WArnIng! Always pull the mains plug is out
Rotate the backing plate
position (see Fig. D).
of the dust extraction
5
and
4
into the adapter
3
.
3
.
3
into the desired
7