Fixing The Feet Montaje De La Silla Para Bebé - asalvo TRONA CHEF Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

adjusting brackets.
MOntAjE DE LA SILLA pARA bEbé
To lift the seat unit to the top of
the legs simply press and hold the
red buttons on the seat unit ad-
justment brackets and lift. There
are six positions to adjust height.
Take out the wheels from the bag,
and insert them into the holes of
the rear feet.
3
FIxInG thE FEEt
MOntAjE DE LA SILLA pARA bEbé
Turn the highchair upside down.
Please note that each of the four
legs has a sprung loaded pin.
Line up one of the feet so that the
small hole in the top of the foot li-
nes up with the pin.
Push firmly on the foot at either
end until each of the two sprung
pins click into place within the
small hole in the foot. Repeat for
other foot.
Note the rear foot is indicated by a
red circular sticker located on the
white plastic foot.
Take one stop washer and insert
the short screw, then insert it into
the bottom hole at the rear of the
front left leg and repeat the pro-
cess on the right leg.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido