Fitting The Seat Cover Montaje De La Silla Para Bebé; Fitting The Tray Montaje De La Silla Para Bebé - asalvo TRONA CHEF Guia Del Usuario

4
FIttInG thE SEAt cOvER
MOntAjE DE LA SILLA pARA bEbé
Slide the pocket of the seat cover back over the curved back frame. Secure the
seat sides by wrapping them around the frame and fastening plastic clips (a)
at each side of the seat.
EN
5
FIttInG thE tRAY
MOntAjE DE LA SILLA pARA bEbé
Position the tray to front of the arms, full the front lever (a) found on the un-
derside of the tray, whilst sliding the tray along with the slot (b) to the position
required.
The tray has three positions only as indicated on the arm rests, line the tray
with the desired position, release the levers to lock position. In the case the
tray is not automatically locked onto the armrests, move the tray slightly until
a double click is heard signaling the tray is securely locked.
WARNING: Never leave the tray fitted in a position in which the warning signs
are visible.
The top tray can be removed by pulling at the ridge ( c) and (d).
To replace again, position the top tray over the bottom tray and push down
to secure. The tray maybe stored on the back legs of the highchair. Align the
holes in the rear of the tray with the small pegs on the back legs.