Throttle Cable Adjustment; Drive Chain - CLIPIC STREPPER ST50 Manual Del Usuario

Checks and maintenance

THROTTLE CABLE ADJUSTMENT

As the figure shown: there is 0.5-1mm slack at the throttle
cable. Adjust the throttle cable according to following ins-
truction:
Hole the throttle cable hose to check the slack.
Loosen the lock nut (1) and adjust the cable slack by turning
adjuster (2) in or out to obtain the correct slack.
After adjusting the slack, tighten the lock nut (1).

DRIVE CHAIN

It is suggested that the worn chain replacement be conducted
by approved Maverick dealer.
WARNING
In order to assure the maximum safety,the drive chain
check and adjustment should be carried out before the
riding.
114