Gear Shift Lever - CLIPIC STREPPER ST50 Manual Del Usuario

Controls

GEAR SHIFT LEVER

There are three gearshifts for ST50 motorcycle and four
gearshifts for ST90.
Gearshift lever 1 is connected with ratchet. After choosing
one gear, the gearshift lever is returned to its original posi-
tion for choosing another gear. Every time when you stamp
the front part of the shifting gear treadle from the neutral
gear, the low speed shift is engaged; When you stamp the
rear part of the shifting gear treadle, the next higher speed
shift is engaged.
When you stamp the rear part of the shifting gear treadle,
shifting down.
NOTICE
When the gearshift is in neutral gear position, the green
indicator (neutral gear indicator) will light.
Before shifting gear down, reduce the motorcycle speed, and
when shifting gear down before the connection of clutch, in-
crease the engine speed to avoid overwear of rear type and
driving elements.
90
1
(ST50)
(ST90)