EGO POWER+ LM2130SP Manual Del Operador página 30

VARIABLE-SPEED SELF-PROPEL SYSTEM (only for LM2130SP/
LM2130SP-FC)
LM2130SP/LM2130SP-FC mower is equipped with variable-speed, self-propel capability.
To increase the speed, rotate the self-propel-speed-control knob forward. To decrease the
speed, rotate the self-propel speed control knob backward.
NOTICE:
When the self-propel speed
control knob is rotated backward to the
lowest position, the self-propel function
does not function (Fig.17).
This system is independent of the blade
On-Off switch; it is not dependent on
blade rotation. For example, when you
have completed cutting your lawn, you
can use the self-propel to propel the
mower back to your storage location
without blade rotation. Or you may choose to operate the mower as a non-self-
propelled mower to maximize battery running time.
To operate the self-propel system without blade rotation, press the self-propel
trigger(s).There are two self-propel triggers. Press either trigger to start the self-propel
function (Fig. 17).
To turn the self-propel off, release the self-propel trigger.
To operate with the blade rotate on for cutting:
1. Depress the safety button.
2. With the safety button depressed, pull the bail switch upward to the handle and
release the safety button.
3. Hold the bail switch against the handle with the either of your hands. Press either
of the self-propel triggers.
4. With one hand holding both the bail switch and the self-propel trigger against the
handle, use the other hand to adjust the self-propel-speed-control knob to choose
the desired speed.
30
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC
17
Self-Propel Trigger
Self-Propel Speed-
Control Knob
OFF