Short Instruction Into Operation - Schick Dental S2 Master Manual Del Usuario

6. Short instruction into operation

activate mains switch (18)
milling arm jointed arm
- Fastening and loosening with clamping lever
- loosen clamping lever
- position of clamping lever can be adjusted at any position desired by
pulling and turning
v ertical arm
- adjust vertical arm at any position using clamping lever
- use lever (8) to draw spindle down
fine adjustment through micrometer spindle (11)
milling spindle
- tension lever (7) showing to the left when chuck is closed
- motor on/off with swith „Motor - EIN/AUS" (4)
operating unit
- speed adjustment variable with speed selector (2) - digital indicator (1)
- magnet on/off with swith „Magnet - EIN/AUS" (3)
- changing rotation of milling spindle by using switch „Motor - R/L" (5)
Important!
Detailed description see point 7 „Operation"
Short instruction into operation
(12); for height adjustment use handwheel
8
(6)
(13)
(6)