Leviton 476TL-T12 Manual De Uso

Telephone Input Distribution Panel
To view installation video, pictures, descriptions, specifications, or instruction sheets for the
Telephone Input Distribution Panel, please visit our web site at: www.leviton.com.
WarnIngs anD CauTIons
• Follow all warnings and instructions marked on the product.
• Do not use or install in wet locations unless the components are designated specifically for
use in wet locations.
• Never push objects of any kind into this product through openings, as they may touch
dangerous voltages.
• Never install communications wiring or components during a lightning storm.
• Never touch uninsulated wires or terminals unless the wiring has been disconnected at the
network interface.
• Use caution when installing or modifying communications wiring or components.
• To prevent electrical shock, each opening must be filled with a module.
InTroDuCTIon
Application
Leviton's Telephone Input Distribution Panel (TIDP) is designed to connect telephone
services for home or small office cabling. The panel fits into Leviton's Structured Media
enclosures (SMC), featuring installer friendly Push-Lock Pin mounting. The TIDP provides
for standards compliant patching of the wall jacks to sources in the SMC and can be used
with various Leviton modules to provide for voice distribution. Route incoming telephone
service throughout the home or small office in up to four line applications using the 110
IDC, Voice Line Input Jacks, or a combination of both. Connect a security system to the
module via a dedicated Security Port, providing over-ride protection on the primary line in
case of emergency. The TIDP also features a Test Port and Auxiliary Disconnect Outlet
(ADO) allowing the user to isolate all internal telephone wiring and test the incoming phone
service from one central location.
Configuration
Telephone Input Distribution Panel (476TL-T12):
Features:
• 110 IDC Punchdown for basic phone, fax, modem service
• 4 Voice Line Input Jacks for connecting to analog telephone
jacks on a VoIP or Triple Play Modem
• Security Jack for Line Over-Ride and shorting plug
• Distributes up to 4 Lines of telephone service to up to
12 locations
Package Contents
The following items are included with your Panel:
• Telephone Input Distribution Panel
• Plastic 110 Termination Tool
• Four Push-Lock Pins and Grommets
• Twelve 8" 8p8c Flat Satin Patch Cables
• One 3" 8p8c Flat Satin Patch Cable (installed)
• Instruction Sheet
Required Tools
For wire termination the following tools are required:
• Angle cutters (if using the provided Plastic 110 Termination Tool)
• Professional Impact Tool with 110 Cutting Blade
• Wire Cutters
• UTP Wire Stripping Tool
TIDP
WITH
TRIPLE PLAY
VOICE INPUT
JACKS
VOICE LINE
INPUT JACKS
1
2
3
4
PK-93593-10-02-0A
®