Leviton 42089 Instrucciones De Instalación

IMPORTANT INSTRUCTIONS:
• Read and understand all instructions. Follow all warnings and instructions
marked on the product.
• Do not use this product near water–e.g., near a tub, wash basin, kitchen sink
or laundry tub, in a wet basement, or near a swimming pool.
• Never push objects of any kind into this product through openings, as they
may touch dangerous voltages.
• To be installed and/or used in accordance with appropriate electrical codes
and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
• Save these instructions.
What's Included:
DIN rail module Side covers (2x)
Installation
1.
Mount the DIN rail module to a 35mm wide rail by engaging the top hook
of the rear bracket, and then pulling it down to lock the module into place.
3.
Load the jack to be installed by orienting the latch with the UP indicator
on the module. Capture the bottom ridge of the jack and then rotate it into
place. A flat blade screwdriver may be used to depress the tab as needed.
NOTE: For Leviton tool-free shielded snap-in jacks (Europe only) install
jack upside down. Applicable part nos. AC6JAKS000DC, C6CJAKS00DC.
Removal
• To remove the jack from the module depress the
jack's latch using the screwdriver and pry the
module out gently.
• To remove the module from the DIN rail, hold
the module in place, while using a flat blade
screwdriver to pry the bottom latch of the DIN rail
bracket until the module releases.
Universal QuickPort DIN Rail Module
Cat. No. 42089
INSTALLATION INSTRUCTIONS
SAFETY INFORMATION:
• Never install communications wiring or components during a lightning storm.
• Never install communications components in wet locations unless the components
are designed specifically for use in wet locations.
• Never touch uninsulated wires or terminals unless the wiring has been disconnected
at the network interface.
• Use caution when installing or modifying communications wiring or components.
• Test all network cables for proper pin-out configuration, prior to interconnecting the
devices and systems.
• For indoor applications only.
Required Tool:
Standard (flat blade) screwdriver
2.
While pushing the sides outward, pull the loading arm forward to place
the module into loading position.
4.
Guide the cable between the module sides, while closing the loading arm.
Optional side covers may now be installed.
NOTE: If ganging multiple modules together, remove the covers between
adjoining modules.
Leviton ® and Leviton® Block & Design are trademarks of Leviton Manufacturing Co., Inc. and are
registered trademarks in many countries throughout the world.
Patents covering this Product, if any, can be found on Leviton.com/patents.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing
at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department,
165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
LIMITED 1 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that
this product at the time of its sale by Leviton is free of defects in materials and workmanship under
normal and proper use for one year from the purchase date. Leviton's only obligation is to correct
such defects by repair or replacement, at its option. For details visit www.leviton.com or call
1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of
this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is
not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied warranties of any kind, including merchantability and fitness
for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the
duration of any such implied warranty, including merchantability and fitness for a particular purpose,
is limited to one year. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost
sales or profits or delay or failure to perform this warranty obligation. The remedies provided
herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
For Technical Assistance Call: 1-800-824-3005 (USA Only) or
1-800-405-5320 (Canada Only) www.leviton.com
DI-000-42089-25A
ENGLISH
Optional
Optionnels
Opcional