Technical Data - Bosch FLM-420-EOL4W-D Guia De Instalacion

12 en
Notes
-
-
-
-
Functions
The FLM-420-EOL4W EOL Module LSN can detect faults in the LSN line and auxiliary power in
accordance with EN 54-13, and uses the line to report an error on the fire panel's operating
panel.
The FLM-420-EOL4W is used to complete LSN loops and LSN stubs. Please use the FLM-420-
EOL2W EOL module to terminate LSN T-taps.
NOTICE!
The FLM-420-EOL4W cannot be used to terminate T-taps.
Address setting
Use a slotted-head screwdriver to move the rotary switches to the required position.
Connection
Description Function
LSN a1- LSN in
LSN b1+
LSN a2- LSN outgoing
LSN b2+
POW IN +U Power supply, incoming
POW IN 0V
POW OUT +U Power supply, outgoing (only required with ERT system)
POW OUT 0V
Shield Cable shielding

Technical data

AUX input voltage
LSN input voltage
AUX current consumption
LSN current consumption
Housing material
Housing color
Dimensions
Weight
Permitted operating temperature
Permitted storage temperature
Permitted relative humidity
Protection class compliant with IEC 60529
F.01U.121.916 | 5.0 | 2011.05
Installation must only be performed by authorized and specialized personnel!
Every end of the LSN bus at which 4-wire elements are connected must be terminated
with an EOL module.
Country-specific standards and guidelines must be observed during installation.
If loop wiring is present, the power supply must only terminate in the loop when ERT is
used. If no ERT system is present, the power supply must terminate at the FLM-420-
EOL4W module.
FLM-420-EOL4W-D
8 VDC to 30 VDC
15 VDC to 33 VDC
ABS + PC blend
Signal white (RAL 9003)
Approx. 77 x 86 x 44 mm
85 g
-20 °C to +55 °C
-25 °C to +85 °C
<96%, non-condensing
IP 30
FLM-420-EOL4W-D | FLM-420-EOL4W-S
FLM-420-EOL4W-S
< 5.0 mA
< 2.0 mA
Approx. 126 x 126 x 71 mm
346 g
IP 54
Bosch Sicherheitssysteme GmbH