Denon DVD-2200 Instrucciones De Operación página 11

(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (P
The red (P /C
R R
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
Y, B-Y and Y/C
• Connect in this way if your TV is compatible with Progressive Scan.
If necessary, connect
the video terminals,
referring to page 10.
Y P /C P /C
B B R
COMPONENT VIDEO IN
NOTES:
• Use the three commercially available video cords to connect the DVD-2200's color component output connectors to the TV or monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV is NTSC formated set to
NTSC. (See page 28.)
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated only)
• To use with 2-channel audio output, set "2 CHANNEL" in "AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP" at the initial settings.
(See page 30.)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to comply with your TV's aspect. (See page 28.)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
/C
R R
), blue (P /C ) and brightness (Y) signals are output independently, achieving more faithful
B B
, C and Y, etc.). For details, refer to the TV's operating instructions.
R B
TV
R
, P /C and Y)
B B
DVD-2200
L R
AUDIO IN
ENGLISH
, P and Y/R-
R B
To power outlet
11