Metra 99-5853CH Instrucciones De Instalación

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets •C) Pocket • D) (4) Panel clips • E) (2) #8 x 3/8" Phillips pan-head screws
• F) (4) #8 x 3/8" Phillips truss-head screws • G) Wiring harness (not shown) • H) Antenna adapter (not shown)
A B
Metra. The World's Best Kits.
®
Ford Mustang ( † )
†
With single zone, manual climate control
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Included interface for climate and steering wheel functions
• Painted charcoal with a matte black center
C D
MetraOnline.com
2010-2014
E F
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
99-5853CH
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................4
Axxess Interface Installation .............................5-11
Final Assembly .......................................................9
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface built into kit
Antenna Adapter: Included with kit
Steering wheel control interface: Included with kit
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 11/16/20 INST99-5853CH