Kit Assembly - Metra 99-3011S Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ISO DIN radio provision with pocket
1. Remove the metal "DIN" sleeve
and plastic trim ring from the
aftermarket radio.
2. Secure the pocket to the Radio
Brackets using the supplied (4)
screws. (Figure A)
3. Secure the radio to the Radio
Brackets with screws supplied
with the radio. (Figure A)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Remove the factory vents and
then snap them onto the radio trim
panel. (Figure B)
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-3011S
Double DIN radio provision
1. Mount the radio to the Radio
Brackets with screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
3. Remove the factory vents and
then snap them onto the radio trim
panel. (Figure B )
4. Reassemble the dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)

Publicidad

Tabla de contenido
loading

Tabla de contenido