Graco 4EVER Manual De Instrucciones página 97

Sliding Latch Plate and ALR
Retractor
A latchplate that slides freely on the
belt webbing and cannot, by itself,
hold the belt snug around a car
seat.
Slowly pull the shoulder belt all
the way out. Route the vehicle
seat belt through the proper belt
path and buckle it in. Then, as you
pull the vehicle seat belt tight, feed
all the slack back into the retractor.
Grab the sides of the seat at the belt
path and slide the seat side-to-side
and front-to-back. The seat should not
move more than 1 inch (2.5 cm).
97