Graco 4EVER Manual De Instrucciones página 96

Locking Latchplate and ELR
Retractor
A latchplate that holds the lap belt
snug after it has been adjusted;
contains a metal bar on the
underside of the hardware that
"locks" the belt in position.
When installing the car seat, route
the vehicle seat belt through the
proper belt path and buckle it in.
Then, pull upwards on the shoulder
belt so that the lap belt gets tight
around the car seat.
Grab the sides of the seat at the belt
path and slide the seat side-to-side
and front-to-back. The seat should not
move more than 1 inch (2.5 cm).
96