Otto Bock 12K100-RENTAL DynamicArm Instrucciones De Alineamiento Y Montaje página 13

Example: Prosthetic socket with 12K100
DynamicArm® and system electric hand.
1
Rotate the prosthetic component (system
electric hand or system electric greifer) until
the quick disconnect wrist unlocks. Carefully
pull off the prosthetic components.
Caution! The DynamicArm® must
be switched off before removing
the prosthetic components.
2
Turn the finger wheel counter-clockwise to
set minimum compensation. This will prevent
the band from being pulled in.
Note:
A DynamicArm® with a retracted
band must only be repaired by
an authorized Otto Bock® Myo-
Service provider !
3
13