Use the • and ª cursor buttons to set the
5
adjustment value.
Press the ENTER button.
6
• All the adjustments are stored in the memory.
Use the 0 and 1 cursor buttons to select the point
7
to be set.
Use the • and ª cursor buttons to adjust the
brightness level of the selected point.
(See "Reference" on page 48.)
• The level decreases (the picture gets darker)
when the ª cursor button is pressed and
increases (the picture gets brighter) when the •
8
cursor button is pressed.
• Values from 16 to 235 can be set. It is not possible
to set in such a way that the level of dark sections
exceeds that of bright sections.
NOTE: When the CLEAR button is pressed during
gamma correction, all the setting points are
set back to the standard level.
Press the ENTER button.
9
• All the adjustments are stored in the memory.
To exit the picture adjust mode
Press the PICTURE ADJUST button.
Remote control unit
ENTER
Remote control unit
MEMORY 1
235
Remote control unit
0
0
Remote control unit
ENTER
Remote control unit
ENGLISH
GAMMA
100
47