Connections - Denon DVD-9000 Instrucciones De Operación

ENGLISH

4 CONNECTIONS

• Read the manuals of all the components when making
connections.
• Keep the power cord unplugged until all connections have
been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
(1) Connecting to a TV
• Use the included audio video cord to connect the TV's video input connector and audio input connectors to the DVD-9000's VIDEO OUT
or S-VIDEO OUT and AUDIO OUT.
DVD-9000
• Connect the DVD-9000's video outputs to the TV either
directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder). Some discs contain copy
prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to
comply with your TV's video format. When the TV is NTSC
formated set to NTSC. (See page 27)
10
S-VIDEO IN VIDEO IN
L
R
AUDIO IN
NOTES:
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power cord together with connection cords may
result in humming or noise.
S-Video output connector
The video signals are divided into color (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector, we
recommend connecting it to the DVD-9000's S-Video
output connector using a commercially available S-Video
connection cord.
TV
NOTES:
• To use with 2-channel audio output, set "2 CHANNEL" in
"AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP" at the
initial settings. (See page 29)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to
comply with your TV's aspect. (See page 26)
• To use with video out or s-video output, set "INTERLACED"
in "VIDEO OUT" in "VIDEO SETUP" in "SETUP" at the
initial settings. (See page 27)
To power outlet