Cx5130-Install On The Mounting Rail - Hach CX5130 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Figure 2 CP27xx dimensions
Dimension
CP2711
a
308.4 mm (12.14 in.)
b
211.9 mm (8.34 in.)
c
75 mm (2.95 in.)
d
7 mm (0.28 in.)
e
23 mm (0.91 in.)
f
219.5 mm (8.64 in.)
g
148 mm (5.83 in.)
h
26.5 mm (1.04 in.)
Dimension
CP2711
a1
297.5 mm (11.71 in.)
b1
201 mm (7.91 in.)
c1
2—5 mm (0.08—0.2 in.)
CX5130—Install on the mounting rail
Note: Carefully touch the module to prevent damage.
Normal use of the CX5130 system causes high temperatures. The instrument decreases the
temperature through a passive airflow system. The airflow openings are find at the top and bottom of
the module housing. Make sure to install the module horizontally. Keep a minimum clearance of
30 mm (1.2 in.) at the bottom and top side for a correct airflow. Refer to
6 English
Table 1 CP27xx dimensions
CP2716
395.8 mm (15.58 in.)
263.9 mm (10.39 in.)
75 mm (2.95 in.)
7 mm (0.28 in.)
23 mm (0.91 in.)
219.5 mm (8.64 in.)
148 mm (5.83 in.)
51.4 mm (2.02 in.)
Table 2 CP27xx cut out dimensions
CP2716
384.4 mm (15.14 in.)
252.9 mm (9.96 in.)
2—5 mm (0.08—0.2 in.)
CP2718
462.4 mm (18.2 in.)
302.6 mm (11.91 in.)
72.5 mm (2.85 in.)
7 mm (0.28 in.)
20.5 mm (0.81 in.)
219.5 mm (8.64 in.)
148 mm (5.83 in.)
70.8 mm (2.79 in.)
CP2718
451.4 mm (17.77 in.)
291.6 mm (11.48 in.)
2—5 mm (0.08—0.2 in.)
Figure
3.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cp2711Cp2716Cp2718

Tabla de contenido